mediapcnet

DSC PG9985 Information The DSC PG9985 is a fully supervised two-way wireless PowerG flood detector consisting of a transmitter connected to the device via a 1.8m (6ft) cable. The PG9985 senses the presence of water prompting advance warning of potential flooding. The transmitter is installed at a higher level on the wall with the probe located at floor level or a desired height. Image:

Metabo WEBA 17-125 Quick Information The Metabo WEBA 17-125 Quick is a 1,700-watt angle grinder that combines the power of a large grinder with the compactness of a small one. It is ideal for a variety of industrial applications, such as cutting, grinding, and polishing. Specifications

Husqvarna 226HS99S Information The Husqvarna 226HS99S is a single-sided petrol hedge trimmer with a 42.5-inch (108 cm) cutter bar. It is powered by a 23.6cc X-Torq engine that delivers 75% lower emissions and up to 20% more fuel efficiency than a traditional 2-stroke engine. The X-Torq engine also produces less vibration, which makes for a more comfortable user experience. The 226HS99S features a single-sided cutter bar, which reduces weight and makes it easier to maneuver around trees and shrubs. The cutter bar is made from hardened steel for durability, and it has a maximum cutting capacity of 22mm.

AL-KO GS 3,7 Li Multicutter Information the information about the AL-KO GS 3,7 Li Multicutter: Introduction The AL-KO GS 3,7 Li Multicutter is a cordless, battery-powered garden tool that can be used for a variety of tasks, including trimming hedges, cutting small branches, and pruning roses. It is powered by a 3.7-volt lithium-ion battery that provides up to 45 minutes of runtime on a single charge. The multicutter features a comfortable ergonomic grip and a lightweight design, making it easy to use for extended periods of time. It also comes with a variety of attachments, including a pruning blade, a hedge trimmer blade, and a saw blade, so you can use it for a variety of tasks.

Makita HM0871C Information The Makita HM0871C is a 12-pound SDS-MAX demolition hammer that delivers 8.6 ft.-lbs. of impact energy with a powerful 10 AMP motor. It weighs only 12.3 lbs., creating a compact solution for overhead applications. The HM0871C features Makita's AVT® (Anti-Vibration Technology) to reduce user fatigue and vibration, and a SoftNoLoad function that reduces vibration and noise when the tool is not in use. It also has a one-touch sliding chuck for easy bit installation and removal, and a LED lamp that indicates when to replace the carbon brushes. Here is a table of the full specifications of the Makita HM0871C: Feature Spec Motor 10 AMP Impact energy 8.6 ft.-lbs. Weight 12.3 lbs. Sound pressure level 98 dB(A) Vibration level 1.5 m/s² Impact rate 1,100-2,650 bpm Chuck type SDS-MAX Features AVT®, SoftNoLoad, one-touch sliding chuck, LED lamp Here are some of the key features of the Makita HM0871C:

Emos GK-9 Information the information about the Emos GK-9: Introduction The Emos GK-9 is a voltage tester that is used to measure the voltage of electrical circuits. It is a small, handheld device that is easy to use and can be used by anyone, regardless of their level of electrical expertise. The GK-9 is powered by a 9V battery and has a red LED indicator that lights up when the voltage is detected. The tester has a range of 6-400V and can be used to measure both AC and DC voltages.

Makita RP2301FC Information the Makita RP2301FC information: Intro The Makita RP2301FC is a 3-1/4 HP plunge router with variable speed. It is a powerful and versatile tool that can be used for a wide range of woodworking applications, including cabinetry, furniture making, and inlays. The RP2301FC features a 15 AMP motor that delivers speeds from 9,000 to 22,000 RPM, as well as electronic speed control to maintain constant speed under load. It also has a soft start feature for smooth start-ups, an electric brake for increased productivity, and a 0-2-3/4" plunge depth capacity.

Velleman HPG1 Information the Velleman HPG1 information: Introduction The Velleman HPG1 is a pocket-sized function generator that can be used to generate a variety of test signals. It features three different waveform types (sine, square, and triangle), as well as a powerful sweep function. The HPG1 is powered by a 9V DC power supply and has a built-in LCD display for viewing the output settings.

Metabo Power 160-5 18 LTX BL OF Information The Metabo Power 160-5 18 LTX BL OF is a cordless compressor that is designed for use in the interior development and on construction sites. It is powered by a brushless motor that is oil-free, which makes it easier to transport and reduces the need for service. The compressor has a filling capacity of 70 l/min (2.5 cfm) and an effective delivery volume of 60 l/min (2.1 cfm). The maximum pressure is 8 bar (116 psi) and the tank capacity is 5 l (1.3 gal). Specifications

DeWalt DW831 Information The DeWalt DW831 is a 5-inch medium angle grinder that is designed for heavy-duty applications. It features a powerful 12-amp motor that delivers up to 11,000 RPM, making it ideal for cutting, grinding, and polishing a variety of materials. The DW831 also has a number of features that make it comfortable and safe to use, including a keyless adjustable guard, a rear auxiliary handle, and a dust shroud. Image of DeWalt DW831 angle grinder Specifications

Parkside PAH 1700 A1 Information The Parkside PAH 1700 A1 is a demolition hammer that is designed for heavy-duty demolition work. It has a powerful motor that delivers 1700 watts of power and a striking energy of 50 joules, making it ideal for breaking through concrete, masonry, and other hard materials. The PAH 1700 A1 has a number of features that make it a versatile and easy-to-use tool. It has a 30mm SDS-plus chuck that accepts a wide range of demolition and chisel bits. The tool also has a variable speed trigger that allows you to adjust the speed and power of the hammer to suit the task at hand.

Makita BTM40RFJX3 Information The Makita BTM40RFJX3 is a cordless multi-tool that is designed for a variety of applications, including cutting, grinding, polishing, rasping, sanding, and sawing. It is powered by a 18V Li-ion battery and has a variable speed trigger for precise control. The tool also features a soft grip handle for comfort and a dust blower to keep the work area clean. Image of Makita BTM40RFJX3 Specifications

Parkside PMTS 180 A1 Information Introduction The Parkside PMTS 180 A1 is a powerful and versatile metal cutting saw that is ideal for a variety of DIY and professional applications. It features a powerful 1280-watt motor that delivers up to 7700 RPM, making it capable of cutting through a wide range of materials, including steel, cast iron, and aluminum. The saw also features a smooth, stepless adjustable bevel angle of up to 45 degrees, allowing you to make precise angled cuts. In addition, the saw comes with a number of safety features, including a spindle lock for quick and easy disc changes, a workpiece clamp for secure holding, and a dust extraction port for keeping your work area clean. Image

Einhell BT-CD 14,4/3 Li Information Introduction The Einhell BT-CD 14,4/3 Li is a cordless drill/driver that offers a powerful 14.4V motor and a long-lasting 1300mAh Li-ion battery. It's a versatile tool that can be used for a variety of tasks, including drilling, driving screws, and tightening nuts. The BT-CD 14,4/3 Li is also equipped with a number of features that make it easy to use, such as a quick-release chuck, a variable speed trigger, and a belt clip. Image

Black & Decker 7157 Information the information about the Black & Decker 7157 drill: Introduction The Black & Decker 7157 is a corded electric drill that is perfect for a variety of household and workshop tasks. It features a variable speed range of 0-1200 RPM, which allows you to adjust the speed to the task at hand. The drill also has a reversing function, which is useful for driving screws in and out. The 7157 has a 3/8" chuck, which can accommodate a wide range of drill bits.